Emerging Fabrication Strategies and Multiscale Characterisation of Radiation Shielding Materials: A Review

Authors

  • Yahaya Khalid Kaika Department of Physics, Nasarawa state university, Keffi
  • Umar Ibrahim Department of Physics, Nasarawa state university, Keffi
  • Abdullahi Abubakar Mundi Department of Physics, Nasarawa state university, Keffi
  • Mustapha Mohammed Idris Department of Physics, Nasarawa state university, Keffi
  • Muhammed Isa Oshafu Department of Physics, Federal University of Lafia

Keywords:

Radiation shielding, Nanofillers, Polymer, Ceramic, Foams

Abstract

Ionizing radiation presents significant hazards in medical radiology, aerospace, and nuclear power systems, necessitating effective shielding for the protection of people and equipment. Conventional shielding materials such as lead remain widely used; however, concerns regarding toxicity, excessive weight, and limited adaptability have accelerated the search for alternative materials. This review examines recent developments in polymer-based materials, composites, nanocomposites, ceramics, concrete, and hybrid systems for radiation shielding applications. The disparity from existing reviews that largely treat material classes independently, this work integrates fabrication approaches, microstructural tailoring, characterization techniques, and application-driven shielding performance. Emphasis is placed on the role of advanced processing methods and nanoscale fillers in enhancing attenuation efficiency. Key characterization tools, including X-ray diffraction, scanning electron microscopy, mechanical testing, and radiation attenuation measurements, are critically assessed. By providing a multiscale comparative perspective and highlighting sustainability considerations, this review identifies current limitations and outlines future directions for the development of effective, lightweight, and environmentally responsible radiation shielding materials.

         Views | Downloads: 9 / 9

References

Abdullah, M. A. H., Rashid, R. S. M., Amran, M., Hejazii, F., Azreen, N. M., Fediuk, R., & Idris, M. I. (2022). Recent trends in advanced radiation shielding concrete for construction of facilities: materials and properties. Polymers, 14(14), 1-10.

Abramovskis, V., Drunka, R., Csáki, Š., Lukáč, F., Veverka, J., Illkova, K., & Shishkin, A. (2023). Preparation and Characteristics of High - Performance, Low-Density Metallo – Ceramics Composite. Materials, 16(24), 1-10.

Adelodun, M. O., & Anyanwu, E. C. (2024). A critical review of public health policies for radiation protection and safety. Int. J. Front. Med. Surg. Res, 6(1), 029-046.

Alasali, H. J., Rilwan, U., Mahmoud, K. A., Hanafy, T. A., & Sayyed, M. I. (2024). Comparative analysis of TiO₂, Fe₂O₃, CaO and CuO in borate-based glasses for gamma-ray shielding. Nuclear Engineering and Technology, 1(1), 1–6. https://doi.org/-10.1016/j.net.2024.05.006

Alkarrani, H., ALMisned, G., & Tekin, H. O. (2025). A benchmarking analysis on different rubber materials: towards custo-misation of lightweight and effective radiation protection solutions for aerospace and electronic applica-tions. Journal of Rubber Research, 28(1), 129-141.

Almuqrin, A. H., Sayyed, M. I., Elsafi, M., & Khandaker, M. U. (2022). Comparison of radiation shielding ability of Bi2O3 micro and nanoparticles for radiation shields. Radiation Physics and Chemistry, 200(1), 110-170.

Almuqrina, A. H., Mahmoud, K. A., Rilwan, U., & Sayyed, M. I. (2024). Influence of various metal oxides (PbO, Fe₂O₃, MgO, and Al₂O₃) on the mechanical properties and γ-ray attenuation performance of zinc barium borate glasses. Nuclear Engineering and Technology, 1(1), 1–7. https://doi.org/10.1016/j.net.2024.02.032

Aral, N., Duch, M. A., & Ardanuy, M. (2020). Material Characterisation and Monte Carlo simulation of lead and non-lead X-Ray shielding materials. Radiation Physics and Chemistry, 174(1), 108-112.

Araz, A., Kavaz, E., Durak, R., & Akyıldız, F. (2024). Nuclear shielding characteristics of newly developed composite metal foams: role of CeO2 addition and foam type. Materials Chemistry and Physics, 311(1), 128-134.

Bagheri, S., Khalafi, H., & Bahrami, A. A. (2025). An optimal radiation shield design of a small modular nuclear power reactor by genetic algorithm. Nuclear Technology, 211(5), 940-952.

Bawazeer, O., Makkawi, K., Aga, Z. B., Albakri, H., Assiri, N., Althagafy, K., & Ajlouni, A. W. (2023). A review on using nanocomposites as shielding materials against ionizing radiation. Journal of Umm Al-Qura University for Applied Sciences, 9(3), 325-340.https://doi.org-/10.1007/s43994-023-00042-9

Braun, M. (2021). Overview of Framatome’s simulation-assisted works to implement SFP related post-Fukushima measures. In Phenomenology, Simulation and Modelling of Accidents in Spent Fuel Pools. Proceedings of a Technical Meeting (No. IAEA-TECDOC--1949, pp. 56-73).

Chang, Q., Guo, S., & Zhang, X. (2023). Radiation shielding polymer composites: Ray-interaction mechanism, structural design, manufacture and biomedical applications. Materials & Design, 233(1), 112-125.

Chaitali, V. M., Zainab, A., · Mohamed. S. B., Abouzeid, A. T. & Pravina, P. P. (2020). Polymeric composite materials for radiation shielding: a review. Environmental Chemistry Letters, 1(1), 1-13. https://doi.org/10.1007/s10311-021-01189-9

Cheng, J., Li, C., Xiong, Y., Zhang, H., Raza, H., Ullah, S., & Che, R. (2022). Recent advances in design strategies and multifunctionality of flexible electro-magnetic interference shielding materials. Nano-micro letters, 14(1), 70-80.

Chowdhury, R. P., Stegeman, L. A., Lund, M. L., Fry, D., Madzunkov, S., & Bahadori, A. A. (2023). Hybrid methods of radiation shielding against deep-space radiation. Life Sciences in Space Research, 38(1), 67-78.

de Pires, M. M., Sobreira, L. C., Maia, I. Z., Ribeiro, F. R. C., Rodrigues, N. M., Souza, E. G., & Kulakowski, M. P. (2024). Building construction materials for ionizing radiation shielding: a systematic literature review. Caderno Pedagógi-co, 21(1), 3129-3162.

Drobny, J. G. (2012). Ionizing radiation and polymers: principles, technology, and applications. William Andrew. (pp. 36-53).

El-Khatib, A. M., Doma, A. S., Abu-Rayan, A. E., Aly, N. S., & Abbas, M. I. (2022). Novel composites made of natural and waste rubber loaded with lead nanoparticles for gamma radiation shielding. Surface Innovations, 10(4), 312 - 328.

El-Samrah, M. G., Abdel-Rahman, M. A., & El Shazly, R. M. (2018). Effect of heating on physical, mechanical, and nuclear radiation shielding properties of modified concrete mixes. Radiation Physics and Chemistry, 153(1), 104-110.

Ensarioglu, C., Bakirci, A., Koluk, H., & Cakir, M. C. (2022). Metal foams and their applications in aerospace components. In Materials, Structures and Manufac-turing for Aircraft, (pp. 27-63).

Ferrone, K., Willis, C., Guan, F., Ma, J., Peterson, L., & Kry, S. (2023). A review of magnetic shielding technology for space radiation. Radiation, 3(1), 46-57.

Gadtya, A. S., Sahu, B. B., Sagadevan, S., Mahaling, R. N., & Moharana, S. (2024). Polymer nanoparticle composites for modern applications. In Polymer Compo-sites: Fundamentals and Applica-tions, (pp. 425-458).

Galehdari, N. A., & Kelkar, A. D. (2017). Effect of neutron radiation on the mechanical and thermophysical properties of nano-engineered polymer composites. Journal of Materials Research, 32(2), 426-434.

Gouda, M. M., Osman, A. F., Awad, R., & Badawi, M. S. (2024). Enhanced radiation shielding efficiency of polystyrene nanocomposites with tailored lead oxide nanoparticles. Scientific Reports, 14(1), 19970.

Jaroszewski, M., Thomas, S., & Rane, A. V. (Eds.). (2018). Advanced materials for electromagnetic shielding: fundamentals, properties, and applications. John Wiley & Sons, 1-464.

Joshi, M., Aswal, D. K., & Chandra, A. (2024). Radiation Protection Policies: Safe-guarding Health and the Environment. In Handbook on Radiation Environment, Volume 1: Sources, Applications and Policies, (pp. 385-415).

Kaika, Y. K., Guto, J. A., Umaru, I., Sayyed, M. I., Idris, M. M., Maisalate, A. U., Rilwan, U., Mundi, A. A., & Mahmoud, K. A. (2025). Microstructural, thermal analysis, and gamma-ray shielding properties of bricks made of various local natural materials. Radiation Physics & Chemistry, 200(1), 1–9. https://doi.org/10.1016/j.-radphyschem.2025.112742

Kavun, Y., & Eken, M. (2024). Investigation of thermal, acoustic, mechanical, and radiation shielding performance of waste and natural fibers. Applied Radiation and Isotopes, 214(1), 111-129.

Kurian, M., & Thankachan, S. (2023). Introduction: Ceramics classification and applications. In Ceramic catalysts, 1(1), 1-17.

Kurudirek, M., Özdemir, Y., Şimşek, Ö., & Durak, R. (2010). Comparison of some lead and non-lead-based glass systems, standard shielding concretes and commercial window glasses in terms of shielding parameters in the energy region of 1 keV–100 GeV: a comparative study. Journal of nuclear materials, 407 (2), 110-115.

Mahmoud, K. A., & Marashdeh, M. W. (2023). Clay-based bricks’ rich illite mineral for gamma-ray shielding applications: An experimental evaluation of the effect of pressure rates on gamma-ray attenuation parameters. Open Chemistry, 21(1), 202-216. https://doi.org/10.1515/chem-2023-0167

Mirji, R., & Lobo, B. (2017, January). 24. Radiation shielding materials: A brief review on methods, scope and significance. In Proceedings of the National Conference on ‘Advances in VLSI and Microelectronics, (Vol. 24).

More, C. V., Alsayed, Z., Badawi, M. S., Thabet, A. A., & Pawar, P. P. (2021). Polymeric composite materials for radiation shielding: a review Environmental chemistry letters, 19(3), 2057-2090.

Mortazavi, S. M. J., Bevelacqua, J. J., Rafiepour, P., Sina, S., Moradgholi, J., Mortazavi, A., & Welsh, J. S. (2024). Lead-free, multilayered, and nanosized radiation shields in medical applications, industrial, and space research. In Advanced Radiation Shielding Materials, 2(1), 305-322.

Mukherjee, G. S. (2022). Matrices for Composite Materials: Polymers, Metals, Ceramics, and Cements. In Toughened Composites, 2(1), 81-99.

Muzata, T. S., Gebrekrstos, A., Orasugh, J. T., & Ray, S. S. (2023). An overview of recent advances in polymer composites with improved UV ‐ shielding properties. Journal of Applied Polymer Science, 140(14), 1-10.

Ochieng, L. O., Hashim, N. O., Kebwaro, J. M., & Andala, D. (2024). Fabrication and Characterisation of rubcrete-iron compo-site for mixed radiation shielding. AIP Advances, 14(11), 1-10.

Okafor, C. E., Okonkwo, U. C., & Okokpujie, I. P. (2021). Trends in reinforced composite design for ionizing radiation shielding applications: a review. Journal of Materials Science, 56(20), 11631-11655.

Okonkwo, U. C., Okafor, C. E., Ahmad, S., Ohagwu, C. C., Aronu, M. E., Okokpujie, I. P., & Mustafa, J. (2025). Research advancements in machine learning-assisted design of reinforced composite radiation shields. Life Cycle Reliability and Safety Engineering, 1(1), 1-35.

Omana, L., Chandran, A., John, R. E., Wilson, R., George, K. C., Unnikrishnan, N. V., & Paul, I. (2022). Recent advances in polymer nano composites for electro-magnetic interference shielding: a review. ACS omega, 7(30), 25921-25947.

Osman, A. M. (2023). Analysis of radiation shielding effectiveness of hydride and borohydride metals for nuclear industry. International Journal of Advanced Nuclear Reactor Design and Technology, 5(1), 30-43.

Pires, L. F., & de Souza, G. B. (2025). Radiation shielding properties of materials used in the aeronautical industry. Radiation Physics and Chemistry, 235(1), 1-10.

Poornamazian, A., & Izadinia, M. (2024). A comprehensive investigation of performance characteristics, mechanical properties and durability parameters of self-compacting concrete containing iron slag as coarse aggregate. Periodica Polytechnica Civil Engineering, 68(2), 498-510.

Ribeiro, B. L., Grün, P., Toma, F. L., Gerdt, L., Kaspar, J., Barbosa, M., & Sequeiros, E. W. (2025). Effect of titanium in-situ alloying on the microstructure and mechanical properties of the RHEAs MoNbTaW system. European Journal of Materials, 5(1), 1-10.

Rilwan, U., Aliyu, G. M., Olukotun, S. F., Idris, M. M., Mundi, A. A., Bello, S., Umar, I., El-Taher, A., Mahmoud, K. A., & Sayyed, M. I. (2024). Recycling and Characterisation of bone incorporated with concrete for gamma-radiation shielding applications. Journal of Nuclear Engineering and Technology, 1(1), 1-7. https://doi.org/10-.1016/j.net.2024.02.045

Safari, A., Rafie, P., Taeb, S., Najafi, M., & Mortazavi, S. M. J. (2024). Development of lead-free materials for radiation shielding in medical settings: A review. Journal of biomedical physics & engineering, 14(3), 229.

Sathish, K. V., Manjunatha, H. C., Vidya, Y. S., Sankarshan, B. M., Gupta, P. D., Seenappa, L., & Raj, A. C. (2021). Investigation on shielding properties of lead-based alloys. Progress in Nuclear Energy, 1(2), 130-137.

Sayyed, M. I., Almuqrin, A. H., Elsafi, M., & Rilwan, U. (2024a). Evaluation of incorporation of granite waste and SnO₂-NPs into coating mortar for gamma-ray shielding. Radiation Physics and Chemistry, 1(1), 1-7 https://doi.org/10.-1016/j.radphyschem.2024.111818

Sayyed, M. I., Rilwan, U., Mahmoud, K. A., & Elsaf, M. (2024b). Experimental study of the radiation shielding characteristics of new PbO – Na₂O – B₂O₃ – BaO glasses. Journal of Nuclear Engineering and Technology, 1(1), 1 - 7. https://doi.org/-10.1016/j.net.2024.01.058

Selvam, V., Sarika, R., Silambarasan, D., Mary, S. S. L., & Prakash, K. S. (2024). Fundamentals of nanoceramics and their composites. In Industrial Applications of Nanoceramics, 1(1), 329-346.

Shahzad, K., Kausar, A., Manzoor, S., Rakha, S. A., Uzair, A., Sajid, M., & Ahmad, I. (2022). Views on radiation shielding efficiency of polymeric composites/ nano-composites and multi-layered materials: current state and advancements. Radiation, 3(1), 1-20.

Sharma, S. K., & Sarris, C. D. (2022). EMI shielding using flexible optically transparent screens for smart electromagnetic environments. IEEE Journal on Flexible Electronics, 1(3), 174-184.

Shi, D., Xia, Y., Zhao, Y., Wang, J., Ma, X., Liu, M., & Tian, W. (2024). Valorization of steel slag into sustainable high-performance radiation shielding concrete. Journal of Building Engineering, 91(1), 1-10.

Surakasi, R., Prasad, A. R., Pattnaik, B., Rao, M. V., Puthilibai, G., Vibhakar, C., & Rajkumar, S. (2022). Mechanical behaviour of nano ceramic particles reinforced aluminium matrix compo-sites. Materials Today: Proceedings, 59(1), 1452-1456.

Thierry-Chef, I., Cardis, E., Damilakis, J., Frija, G., Hierath, M., Hoeschen, C., & EURAMED, R. N. (2022). Medical applications of ionizing radiation and radiation protection for European patients, population and environment. 10th European Commission Conference on EURATOM Research and Training in Safety of Reactor Systems 30 May - 3 June 2022 | Lyon, France.

Toto, E., Lambertini, L., Laurenzi, S., & Santonicola, M. G. (2024). Recent advances and challenges in polymer-based materials for space radiation shielding. Polymers, 16(3), 370-382.

Verma, S., & Srivastava, A. K. (2024). Advanced radiation shielding materials: radiation and radiological protection. Radiation, 1(1), 1-10.

Wang, H. (2024). Ceramic nanocomposite foams for electromagnetic interference shielding. In Porous Nanocomposites for Electromagnetic Interference Shielding, Woodhead Publishing, 1(1), 297-314.

Wu, X., Yang, Y., Han, S., Zhao, Z., Fang, P., & Gao, Q. (2021). Multi-objective optimization method for nuclear reactor radiation shielding design based on PSO algorithm. Annals of Nuclear Energy, 160(1), 1-10.

Wu, Y., & Wang, Z. (2024). Progress in ionizing radiation shielding materials. Advanced Engineering Materials, 26(21), 1-10.

Wu, Y., & Wang, X. (2024). Advanced polymer composites for radiation shielding. Progress in Materials Science. 1(1), 1-10.

Zaharescu, T., & Mariş, M. (2022). Irradiation effects in polymer composites for their conversion into hybrids. Journal of Composites Science, 6(4), 100-109.

Zeng, C., Kang, Q., Duan, Z., Qin, B., Feng, X., Lu, H., & Lin, Y. (2023). Development of polymer composites in radiation shielding applications: a review. Journal of Inorganic and Organometallic Polymers and Materials, 33(8), 2191-2239.

Zeyad, A. M., Hakeem, I. Y., Amin, M., Tayeh, B. A., & Agwa, I. S. (2022). Effect of aggregate and fibre types on ultra-high-performance concrete designed for radiation shielding. Journal of Building Engineering, 58(1), 1-10.

Zhang, H. Y., Li, J. Y., Pan, Y., Liu, Y. F., Mahmood, N., & Jian, X. (2022). Flexible carbon fiber-based composites for electromagnetic interference shielding. Rare Metals, 41(11), 3612-3629.

Zhao, B., Hamidinejad, M., Wang, S., Bai, P., Che, R., Zhang, R., & Park, C. B. (2021). Advances in electromagnetic shielding properties of composite foams. Journal of Materials Chemistry A, 9(14), 8896-8949.

Downloads

Published

2026-01-29

How to Cite

Kaika, Y. K., Ibrahim, U., Mundi, A. A., Idris, M. M., & Oshafu, M. I. (2026). Emerging Fabrication Strategies and Multiscale Characterisation of Radiation Shielding Materials: A Review. Researchers Journal of Science and Technology, 6(1), 33–46. Retrieved from https://www.rejost.com.ng/index.php/home/article/view/245